North Mercedes-Benz Accessories Guosan Cab:
Choosing and Purchasing Skills of Automobile Parts
1. See if the trademark marks are complete. The packaging quality of authentic products is good, the handwriting on the packaging box is clear, and the overprint color is bright. Packaging boxes and bags should be marked with product names, specifications, models, quantities, registered trademarks, factory names, factory addresses and telephone numbers, etc. Some manufacturers also make their own markings on accessories. Some important components, such as generators, distributors, fuel injection pumps, are also equipped with instructions, certificates and inspector's stamps to guide users to use and maintain correctly. When choosing and purchasing, we should recognize it carefully in order to avoid buying fake and inferior products.
2. See if the geometric dimensions are deformed. Some parts are easily deformed due to improper manufacture, transportation and storage. When inspecting, the axle parts can be rolled around the glass plate to see if there is any leakage at the joint of the parts and the glass plate to judge whether they are bent or not; when choosing the clutch driven disc steel sheet or friction sheet, the steel sheet and friction sheet can be raised in front of the eyes to observe whether they are warping; when choosing the oil seal, the oil seal end with the skeleton should be in a positive circular shape, which can be bonded with the flat glass without bending; when choosing the oil seal without the skeleton, the oil seal can not be bent. The edge should be correct, deformed by hand grip, and can be restored to its original state after loosening hands. When choosing and purchasing all kinds of liners, attention should also be paid to checking the geometric size and shape.
3. See if the joint is smooth. In the process of handling and storage, parts often produce burrs, indentations, damages or cracks in the joint due to vibration and knocking, which affect the use of parts. Pay attention to inspection when choosing and purchasing.
4. See if there is rust on the surface of the parts. The surface of qualified spare parts has both a certain precision and bright brightness. The more important the spare parts are, the higher the precision is, the stricter the anti-rust and anti-corrosion of the packaging is. When choosing and purchasing, attention should be paid to inspection. If rust spots, mildew spots or cracks of rubber parts, loss of elasticity, or obvious turning tool lines on the journal surface are found, they should be replaced.